
50
Need Help? Call toll free: 1-800-268-7200
51
www.bayerdiabetes.ca
Technical,
Service & Care
Technical,
Service & Care
Error Detection Displays:
An error screen will always
have an “E” with a number
in the lower left hand
corner of the display.
If there is an error (hardware, software, testing
errors) detected by your meter then your meter will
beep twice. You will see specifi c instructions to
guide you. The fi rst line of the error screen will tell
you what the error is. The next lines describe what
you should do. When an error screen has an OK
shown, press the button next to it to continue.
Error Detection and Battery Status/Charging/Removal
Error Detection and Battery Status/Charging/Removal
Battery Status Displays:
If you do not charge the
battery, a display will
alert you Shutting down,
Battery is dead. Charge
immediately.
The battery status will be
displayed with a battery
symbol
on the Apply
Blood screen and the
Main Menu screen. It
shows how much battery life is left. This screen
displays full battery.
As the battery is used,
the battery symbol on the
screen gradually shows
less fi ll colour. The colour
of the battery fi ll turns
yellow when the battery is low and then red when
your battery is almost out of charge.
A series of low battery
alerts will tell you that
the battery is low and to
charge soon.
Plug the meter into your
computer. Be sure your
computer is turned on and
not in sleep, hibernate or
power save mode. Please
be aware that USB ports
in some computers and
self-powered USB hubs can become much warmer
than the room. A USB cable has been provided for
your convenience. If you wish to test immediately
after disconnecting from your computer, please
use the USB cable.
The test strip port light will fl ash during charging
and stop fl ashing when charging is complete.
Please remove the meter and store in the wallet
until you are ready to test.
Kommentare zu diesen Handbüchern